How to Replace a Nissan Juke Spare Key
Nissan Juke is a fun and stylish hatchback with an unusual engine setup. It can be a bit noisy, but it's enjoyable to drive.
The battery that powers the key fob on the Nissan Juke must be replaced every two years or at the latest, or if it's low. You can do it yourself, but you'll need tools.
Dead Coin Battery
If your Nissan Juke key fob has stopped working the first thing to examine is the battery that is inside it. It may be dead and requires to be replaced. This is a quick fix that takes only several minutes. Flip the fob upside down so that you'll be able access the small latch/release in the back. Replace the battery you have previously installed by making sure it's facing the bottom of the fob. Line up the two halves with care.
If the fob was exposed to water, it will need to be cleaned before putting the new battery in. It is possible to clean the fob by using isopropyl electronic cleaner and a paper towel. Then allow it to dry completely prior to installing the battery.
The key fob has to be connected to the car in order to begin the engine, which can be done by following the directions in the owners manual or using an OBDII scanner. If the key fob hasn't been linked, it is the most likely reason of why it stopped working. A defective chip inside the fob may cause it to cease to function however this is not a common occurrence. In this scenario the need for a new receiver module could be required. If this is the case, it will need to be replaced by a certified technician.
Water Damage
The key fob is powered by a battery, and these batteries need to be changed every two years or every first sign of the car not responding when you press the "start" button. Keys have rubber seals to keep water out, but submerging the key fob into the ocean or pool can damage the electronic chip inside. If nissan key replacement cost G28CarKeys is the case then you'll need an alternate key from Nissan or a locksmith.
It's possible that the computer lost connection with the key fob and this could be caused by a variety of reasons. It can be fixed by restarting the car. If the "Key ID error" message persists it is necessary to contact Nissan for assistance.
Three common causes are battery that is dead on the key fob or a key that's not programmed, or damaged key fob. The first two are relatively easy to fix, and the third one is more difficult to identify and repair on the spot, however it is generally fixable by a little patience. Compare Nissan Key Replacement prices near you with WhoCanFixMyCar and schedule your repair online. You can read reviews of local Nissan dealerships, Nissan mechanics, and garages in only a few minutes.
Faulty Chip
The key fob on your Nissan Juke has a special chip that transmits a signal to the car whenever you turn it. If the chip is damaged, it can cause the key to stop functioning. If this is the case the issue will only be resolved by replacing the key. There are a myriad of reasons your Nissan Juke's key might be faulty, including water damage or a dead coin battery or a malfunctioning receiver module.
Check the chip for water damage if your key fob has stopped working after a bath or wash. Check that the metal clips that hold the chip are in good condition. Also, ensure that the chip isn't exposed to water. If you spot any signs of water damage on the electronic component, unplug the battery and clean it using isopropyl ethanol or an electronic cleaner.
If the chip is not working If the chip is damaged, you'll have to contact your local locksmith or dealer. They will require the year as well as the model, make and year of your vehicle to locate an appropriate replacement. Also, you will need to record your VIN (Vehicle ID Number) to ensure that the dealer or locksmith will know the key you have. This will enable them to find the correct key code and ensure that they are cutting the correct one.
Faulty Receiver Module
The key fob transmits the radio frequency signal to your car to perform many functions. It can open your trunk as you rush to get groceries or start your car by pressing an icon on the fob. It can also open your windows and turn the horn on in the event that you lock the keys inside your car.
If the key fob ceases functioning, there could be a problem with the receiver module in the vehicle. The receiver modules are tuned to receive specific frequencies that correspond with the signals that are transmitted by the Nissan key fob. A damaged receiver module can prevent your car from responding to the signal sent by the key fob from Nissan.
Whatever the way your Nissan key fob gets damaged, it's beneficial to have a spare key in case the key becomes lost or broken. A locksmith or dealership can program a spare key that works with your Nissan. This can help you avoid the hassle of losing your keys or locking them inside your car.
If your Nissan Juke's key fob was exposed to rain or clean tap water, you can resolve the issue by cleaning it with isopropyl or an electronic cleaner. If, however, the chip has become damaged, you will have to purchase a new key fob that is coded to your car through a locksmith or dealer.